WELCOME TO SURILLI! BEFORE YOU START CONTROLLING THE WORLD AROUND YOU, YOU’LL NEED TO SET UP THE SOFTWARE TO PROGRAM YOUR SURILLI
Surilli is an Arduino compatible IoT module. It can be programed using Arduino IDE. The Arduino Software (IDE) allows you to write programs and upload them to your board.
Get the latest version Arduino Software (IDE) from the download page. Here is the link for download page.
On download page select according to your operating system as shown in figure above. For windows You can choose between the Installer (.exe) and the Zip packages. We suggest you use the first one that installs directly everything you need to use the Arduino Software (IDE), including the drivers.
Click on just download to download your file
When the download finishes, proceed with the installation and please allow the driver installation process when you get a warning from the operating system.
Surilli Arduino Boards
After you have downloaded and installed v1.8.1, you will need to start the IDE and navigate to the Preferences menu. You can access it from the File menu in Windows or Linux, or the Arduino menu on OS-X.
To add board support for our products, start Arduino and open the Preferences window (File > Preferences). Now copy and paste the following URL into the 'Additional Boards Manager URLs' input field:
If there is already an URL from another manufacturer in that field, click the button at the right end of the field. This will open an editing window allowing you to paste the above URL onto a new line.
Surilli Wifi Installation Instructions
Open the Boards Manager window by selecting Tools > Board, scroll to the top of the board list, and select Boards Manager.
If you type "surilli wifi" into the "filter your search" field, you will see options to install Surilli Wifi boards. Click in the desired box, and click the "Install" button that appears. Once installed, the boards will appear at the bottom of the board list.
Once installed, the boards will appear at the bottom of the board list.
Now select the COM port from tools menu.
Now upload the Blink example