Control Things with

Addon Relay

Addon Relay Shield


Relay Shield is the new add on board from Silverback. It is light and easily stackable on all boards of Surilli. It can easily switch your lights, fans, solenoids and other small appliances that run on 230VAC or DC power. This one can handle up to 2x1000 Watts!

Description


Relay Shield is the new add on board from Silverback. It is light and easily stackable on all boards of Surilli. It can easily switch your lights, fans, solenoids and other small appliances that run on 230VAC or DC power. This one can handle up to 2x1000 Watts!

This Add-on board will work with all of our Surilli boards, just wire up the relay control pin to whatever GPIO you like. Using our Surilli board you can stack relay board on it. Check the datasheet for the relay for the exact switching capability, as it depends on type of load and voltage type. This relay is good for handling fairly large devices, computers, TVs, small appliances and more.

Please note: If you are using high voltages use care! High voltages require experience, and are only for use by engineers who are familiar with guidelines and know how to use them safely.

SHOW NOW

Here's some handy specs! Like Relay Shield you get:

  • Switch two loads easily
  • Coil Voltage 5VDC
  • Switch up to 10A at 120VAC resistive load
  • Switch up to 10A at 240VAC resistive load
  • Switch upto 2.5A at 240VAC Inductive Load
  • Light weight - 33 grams
  • Product Dimensions: 62mm x 23mm x 20.2mm

Online support through

Email: support@surilli.io

Facebook Group: https://www.facebook.com/groups/190887191659395/

Whatsapp No: +923377874554

Plug Features


Mouse over the components of device to show Components

Relay 1 Relay 2 Relay 1 signal pin Relay 2 signal pin Relay 1 output Relay 2 output